Monthly Payment Disclaimer
CloseThe values presented on this site are for estimation purposes only. Your actual payment may vary based on several factors such as down payment, credit history, final price, available promotional programs and incentives. Applicable tag, title, destination charges, taxes and other fees and incentives are not included in this estimate.
Dealer Spike is not responsible for any payment data presented on this site. Please verify all monthly payment data with the dealership’s sales representative.
Plus Tax, Title, and Registration180 Months. 8.00% APR. $7,000 Down Payment.
- Pre-owned
- Sold
- Boat
- Fishing
- 001DTT
- 21 ft 2 in
- 7 ft 11 in
- Powered
- 250 HP
- 150
2019 Nitro Z21 Elite
The NITRO® Z21 Elite takes your fishing experience to a new technological level with the Z-Touch™ Command Center at the console. A Lowrance® HDS Carbon 16 fills the face of the console, allowing 100% digital control of nearly all boat systems and eliminating the need for analog gauges and switches. But for your peace of mind, there's a hidden backup manual switch panel, too. The Lowrance® HDS Carbon 16 is NMEA®-networked to an HDS Carbon 12 at the bow, and individual transducers give a multiple viewing options for the underwater landscape below.
The Z21 Elite also includes a Minn Kota® Ultrex® trolling motor, dual 8' Power-Poles, our exclusive Z-Core™ seating system with Force Flex suspension and power lumbar support, plus a number of other tournament-level upgrades. And it rides proudly on a factory-matched tandem-axle trailer with custom wheels and GALVASHIELD® Impact corrosion and chip protection.
Features may include:
Elite- Z-Touch™ Command Center w/digital control of boat functions.
- Bow Lowrance® HDS Carbon 12 gimbal-mounted fishfinder w/downscan transducer on trolling motor.
- Console Lowrance® HDS Carbon 16 flush-mounted fishfinder w/HD transducer (2D puck in hull at transom).
- 2 Power-Pole® 8' (2.44 m) Blade Edition shallow-water anchors.
- Minn Kota® Ultrex® 36V, 112-lb. (50.8 kg) thrust, 45" (1.14 m) shaft trolling motor w/Universal Sonar 2 & i-Pilot®.
- NMEA® networking between fishfinders & trolling motor, Ethernet connected.
- Front console storage compartment w/removable tray for wiring access.
- Power-adjust pneumatic lumbar support for driver’s seat.
- T-H Marine G-Force Conservation livewell culling system.
- Factory-applied keel protector.
- 2 automatic bilge pumps.
- 2 oxygen generators.
- Hot Foot™ throttle.
- Pro-Trim lever.
- 4-bank, 40-amp battery charger.
- 1 extra SRM29 trolling battery.
- Retractable transom trailer tie downs.
- NMMA® certified
- Flotation meets or exceeds NMMA® & U.S. Coast Guard requirements
- EPA-compliant fuel system
- Anti-fatigue, padded comfort bow deck
- Non-skid mats bow & stern
- Spare prop holder
- 5 drink holders
- 4 stainless steel pull-up cleats
- Integrated fold-down stainless steel reboarding ladder
- 4 grab handles (1 at each seat)
- Built-in tournament ruler & holder
- Fire extinguisher
- Horn
- Paddle
- 2 aft 19-gal. (72 L) insulated Guardian™ livewells w/digital timers
- 750 GPH (2,840 LPH) livewell recirculation/pump-out system
- 500 GPH (1,893 LPH) aerator/fill pump
- Oxygen generator in each livewell
- Dual remote drain controls
- Rotomolded w/rounded corners
- Console design w/2" (5.08 cm) additional leg room
- Hydraulic steering w/tilt
- Ready to accept optional removable port console
- Custom-molded modular console
- LED courtesy light
- Below-console RAM® X-Grip® phone holder & 12V outlet
- 45-sq.-ft., (4.2-sq.-m) anti-fatigue, padded bow deck for comfort & mobility
- Bike seat w/hydraulic pedestal
- Pre-owned
- 001DTT
- 2019
- Nitro
- Z21 Elite
- Boat
- Fishing
- BUJ81823J819
- 2B588631
- Single Outboard
- BUJ81823J819
- 1168
- 21 ft 2 in
- 7 ft 11 in
- Powered
- 606 East Miller St., Iowa, LA 70647
- Hydraulic
- 1
- 250 Pro XS
- 250 HP
- 2B588631
- 150
- Gas
-
- Sonar
- GPS
- Swim Ladder
- Soundsystem
- Trolling Motor
- Touch Screen
- Rod Holders
- Bluetooth
- 21' 2" | Towing: 27' 11" | Storage: 24' 4"
- 7' 11"
- Bottom: 6' 2"| Package: 8' 6"
- Package: 6' 10''
- Interior: 18.5"
- 22.5"
- 16 degrees
- 16"
- 55 gal.
- Max: 4 persons
- Person: 825 lbs. | Person, motor & gear: 1800 lbs.
- Average: 2150 lbs.
- Average Package: 4050 lbs.
- Max. recommended: 300 HP
- 150 engine hours. ONE YEAR WARRANTY on engine, electronics, boat, and trailer. Will include three new Interstate lead batteries for trolling motor, and AGM for engine. Has been serviced prior to sale.
- Enhanced Engine Coverage (Component Groups 1 – 19)
- 1. Engines (including electric outboard): Electric outboard motor assembly * engine head(s), engine block and/or cylinder
- barrels, only if damaged by the failure of an internally lubricated Covered Part * all internally lubricated parts including
- pistons, piston rings and pins, main bearings and rod bearings * cylinder head bolts * main bearing bolts * rod bolts *
- rocker arms * crankshaft * connecting rods * camshaft * camshaft bearings * valves * valve springs * push rods * lifters
- * guides and seats * rocker arms * oil pump * valve cover(s) * oil pan * engine oil cooler * harmonic balancer * intake
- manifold * reeds and reed blocks * engine mounts * distributor housing, shafts, and bearings * engine water coolant
- circulating pump * coolant heat exchanger * thermostat * exhaust metering valve, springs, and diaphragm * timing chain,
- gears and/or belt * flywheel * seals and gaskets within component group.
- 2. Diesel Engines Only: Air intake housing * oil cooler housing * oil filter housing * flywheel housing * pump drive gears
- * front covers * idler gears * balancing cover housing * all internally lubricated parts located within the turbocharger,
- housing, and wastegate actuator.
- 3. Electrical: Alternator/stator * voltage regulator/rectifier * engine mounted terminal blocks * engine mounted wiring harness
- * manufacturer recommended ignition switch * starter motor, solenoid, and starter drive * LCD gauge assembly * electric
- choke solenoid.
- 4. Fuel Delivery: Fuel delivery pump (mechanical/diaphragm) * carburetor body * air box (silencer) * electric choke solenoid
- (enricher) * electronic fuel injector delivery pumps (high and low pressure) * fuel injectors * fuel rails * fuel distributors
- * ECU module * throttle position sensor * manifold air temperature sender * idle speed control * mass air flow sensor *
- coolant sensor * O2 sensors * exhaust temperature sender * fuel pump diaphragm * flame arrestor * detonation/knock
- sensor * ignition pickup sensor * seals and gaskets within component group.
- 5. Filters, Fluids, Lubricants, and Taxes: Filters, fluids, lubricants and taxes required to complete a Covered Repair for
- any Covered Part listed above.
- 6. Lower Unit: Internally lubricated parts within the gear case including: forward gear * reverse gear * pinion gear * clutch
- dog * dog pin * cam follower * prop shaft * drive shaft * bearing carriers * bearings * shims * gear housing only if
- damaged by the failure of an internally lubricated Covered Part * seals and gaskets within component group.
- 7. Oil Injection System: Oil injection pump * oil pump drive gear * oil pump drive shaft * oil tank * oil tank cap * oil level
- sensors * oil level warning horn and lights * oil injection lines * oil injection check valves * oil injection metering system.
- 8. Jet Drive: Internally lubricated parts contained within the pump housing including: drive shafts * shaft bearings * shaft
- coupler * flex disc * VTS motor * VTS box *VTS shafts * VTS gauge and switch (excluding jet impellers) * housing only
- if damaged by the failure of an internally lubricated Covered Part * seals and gaskets within component group.
- 9. Ignition: Power pack/switch box * amplifier * ignition trigger coil * ignition module * ignition high output coil * spark plug
- wires * shift interrupter switch and rev limiter.
- 10. Multi-Function Instrumentation (manufacturer or seller installed only): Digital multi-function gauges * cluster
- control unit/display module * power hub * consolidator hub * EMM harness * power supply harness and data harness.
- 11. Power Trim and/or Tilt: Trim and/or tilt motor * trim cylinders * cylinder rams * cylinder mounts and pivots * trim motor
- actuator solenoids * control valves * reverse lock valve * pump * trim and/or tilt wiring harness * trim and/or tilt master
- control switches * trim limit switch * trim position sender * manual trim cylinder * manual trim cable * seals and gaskets
- within component group.
- 12. Manual Steering (main station only, excluding cables): Control helm assembly * control rack and yoke assembly *
- power steering pump * power steering cylinder * steering wheel * steering wheel mounting hub * Jet Drive components:
- column U-joints, steering gate, rudder, nozzle and pulleys * seals and gaskets within component group.
- 13. Hydraulic Steering (main station only, excluding cables): Hydraulic steering head * hydraulic steering lines *
- hydraulic steering cylinder * hydraulic steering flow valves * steering yoke * seals and gaskets within component group.
- 14. Controls (main station only): Manual and electronic shift and/or throttle control box parts including: cams * eccentrics
- * shafts * pivots * bushings * housing * control arms/levers and knobs * start/stop button (tether) * neutral safety switch
- and ignition switch. Shift control cable * throttle control cables * shift and throttle micro switches * potentiometer *
- control panel and wire harness.
- 15. Transmission: Internally lubricated parts contained within the transmission including: clutch plates * thrust plates *
- planetary gears * shift bands * clutch drums * reduction gears * bearings * shafts * bearing carriers * hydraulic pumps
- * valve bodies * hydraulic pistons * transmission mounts and oil pan * transmission case only if damaged by the
- failure of an internally lubricated Covered Part * seals and gaskets within component group.
- 16. V-Drive: Internally lubricated parts contained within the V-drive case including: bevel gears * bearings * shafts * shims *
- bearing carriers * V-drive case only if damaged by the failure of an internally lubricated Covered Part * seals and
- gaskets within component group.
- 17. Stern Drive Upper Housing: Internally lubricated parts contained within the upper housing including: upper drive
- gears set * clutch packs/dogs/cones * shift cams * bearings * shims * bearing carriers * upper drive shaft * upper
- case housing only if damaged by the failure of an internally lubricated Covered Part * seals and gaskets within
- component group.
- 18. Stern Drive Lower Unit: Internally lubricated parts within the gear case including: forward gear * reverse gear * pinion
- gear * clutch dog * dog pin * cam follower * prop shaft * lower drive shaft * shift shaft * bearing carriers * bearings *
- shims * gear housing only if damaged by the failure of an internally lubricated Covered Part * seals and gaskets
- within a component group.
- 19. Transom Assembly: Intermediate shaft * bearings * U-joints * center yoke * drive yoke * gimbal bearings * steering
- yoke * engine coupler * transom shield/gimbal housing only if damaged by the failure of an internally lubricated
- Covered Part * seals and gaskets within component group.
- Anchor (excluding lines, post, rope, cable or chain): Winch * guides * shallow water electric * hydraulic anchor.
- Battery Charger (manufacturer or seller installed only): Battery charger.
- Boat Electrical: Voltmeter * battery main switch * battery isolator * battery selector switch * battery box * fuse block/
- fuse holders * chart light * electric horn * windshield wiper mo
Recommendations
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.